§ 01

What's included

Sourcing Services covers everything between a drawing (or a sample, or a photograph of an OEM part) and a finished component on your dock. You can engage us for any one of these or for the full flow.

  • Quoting from drawings in PDF, DWG, or STEP format.
  • CAD conversion from paper drawings, scans, or hand sketches.
  • Design-for-manufacturing review to flag cost drivers and alternates.
  • Reverse-engineering from samples when no drawing exists.
  • CNC turning, milling, grinding, and associated finishing.
  • Material sourcing, traceability documentation, and certificates on request.
  • Inspection and first-article reporting on production runs.
  • Overflow capacity: contract machining when your own shop is over its limit.
  • Consolidated shipping to Canada. One invoice. One point of contact.
Who We Build For 02 / 04

Three audiences. The same operating team behind each.

A · 01

Packaging industry OEMs

We have our deepest industry experience in packaging: wear parts, production consumables, custom fixtures, and retrofit hardware for the machines that run food, beverage, and consumer packaging lines. For packaging OEMs, we take on three kinds of work:

  • Custom parts from drawings. Turnkey machining of parts you already design: we quote, produce, and ship. Most common on stainless steel wear components and food-grade plastics.
  • CAD and design-for-manufacturing. When your engineering team is buried, we take the design work off their desk. From a concept, sketch, or sample, we produce a production-ready drawing and a quote against it.
  • Overflow capacity. When your own shop is bottlenecked on a specific job or SKU, we slot in as contract machining. Drawings go in, parts come out, your customer never knows. Canadian PM on the account.
Technician operating an STM VL1300 CNC machining center on Maple MPSS's shop floor, producing wear parts and precision components for packaging equipment
Fig. A1: CNC turning, packaging parts run
A · 02

System integrators

For system integrators, we design and machine the custom hardware that ties a production line together, quoted fast from your drawings. Integrators combine machines from multiple OEMs with conveyors, robotics, vision, and controls into a working system for an end customer. The design work is heavy, the timelines are tight, and the margin on custom hardware is thin. That's exactly where we fit.

  • Custom brackets, guards, fixtures, and transfer hardware. The one-off parts every integration needs, quoted fast from your drawings.
  • CAD and DFM for integration-specific components. When a part has to fit between two OEM machines that were never designed to work together, we produce the drawing and the component.
  • Capacity on parallel builds. When you're running three integrations at once and your own shop can only absorb one, we take the hardware scope on the other two.
A2 · 01 Custom tray-forming machine under assembly at Maple MPSS's Chennai facility, with a welded steel frame and pneumatic actuation columns built for a system-integrator client
A2 · 02 Packaging-line transfer station in fabrication, showing custom guarding and conveyor hardware built to a system integrator's machine specification
A2 · 03 Film-unwind and collator stage of a packaging machine, with roll stock staged beside the forming head, overflow fabrication work for a system-integrator customer
A2 · 04 Slatted infeed conveyor and roller frame built for end-of-line pallet handling, fabricated as overflow capacity for a packaging system integrator
Fig. A2: Line-scale integration work, Chennai floor
A · 03

General sourcing

Outside packaging, we've produced parts for food processing, automotive, and general industrial sectors: any application where stainless, aluminum, brass, bronze, or food-grade plastics are the working materials. If you have a drawing and a lot size that fits our range, we can likely quote it.

  • One-off prototypes and short runs. Lot sizes from one piece to several hundred, without the setup surcharges that usually come with small batches.
  • Replacement parts and retrofits. If an OEM is charging a premium on a replacement part and you have the drawing or a sample, send it. We'll tell you honestly whether re-sourcing makes sense.
  • Design and reverse-engineering. Where no drawing exists, we work from samples or photographs, produce the CAD, and quote against it.
Assorted sourced components grouped by category: stainless pipe fittings, rolled sheet stock, PVC and galvanized pipe fittings, and electrical terminal hardware, spanning Maple MPSS's general industrial sourcing work
Fig. A3: General sourcing, mixed-material runs
§ 03

Materials and lot sizes

We machine stainless steel, carbon steel, aluminum, brass, bronze, and engineering plastics, in lots from a single piece to around 500. That range matches the work mid-sized manufacturers actually run: replacement wear parts, production consumables, low-volume machinery parts, and retrofit hardware.

Primary metals
304 and 316 stainless steel, carbon steel, aluminum alloys.
Secondary metals
Brass, bronze, and specialty alloys on request.
Plastics
Food-grade UHMW, Delrin (acetal), PEEK.
Lot sizes
1 to 500. Prototypes, short runs, and repeat production.
Processes
CNC turning, milling, grinding, and associated finishing.
Industries
Deepest in packaging machinery. Substantial experience in food processing, automotive, and general industrial applications.
03 · 01 Close-up of a polished steel mold cavity with a mirror-grade surface finish, illustrating the precision tooling work behind Maple MPSS's machined parts
03 · 02 Set of small aluminum mold and die cavity inserts machined to print and laid out ready for assembly into production tooling
03 · 03 Stainless steel weld-neck and slip-on flanges in several sizes, representative of the material stock Maple MPSS sources and machines for industrial clients
03 · 04 Stainless steel turned components (fittings, bushings, adapters, and nuts) produced on Maple MPSS's CNC turning equipment
Fig. 03: Selected machinery parts across stainless, aluminum, and tool steels
Family of CNC-machined parts (a shaft, bushing, pinion, cam lever, and toothed cam) produced on Maple MPSS's Chennai machining floor
Production run of brackets, pins, channel pieces, and shafts staged on the bench for first-article inspection at Maple MPSS
Stainless steel bushings and threaded couplers in graduated sizes, turned to customer specification
Paired stainless steel spindles with keyed ends and threaded collars, precision-turned for a customer assembly
Machined manifold plate with ceramic-lined bore inserts, an example of Maple MPSS's close-tolerance machining work
Stainless steel threaded coupler with a multi-diameter turned body, produced on CNC turning equipment
Assortment of stainless steel fittings, valves, and threaded adapters from a completed production run
Steel manifold housing with a flanged top and side ports, machined to a customer drawing
Flanged hub assembly with a threaded bore and bolt pattern, CNC-machined to print
Black plastic housing with metal insert bushings, an example of Maple MPSS's work in engineered plastics
Cast aluminum bracket with precision-machined mounting faces, finished for assembly
Stainless steel shaft engraved with part number BMBD13, traceable to its production drawing and revision
Fig. 03b: Twelve production parts. Stainless, aluminum, tool steel, cast, and plastic.
§ 04

How to engage

The first step is always a concrete part. Not a meeting, not a capability deck. We work faster and give you a better read on fit if you send us something specific.

  • Send a drawing. PDF, DWG, or STEP. If the drawing is old or unclear, send it anyway: cleaning it up is part of what we do.
  • Describe the part. A photograph of a sample, a sketch, or a written description. We'll come back with questions and a proposed drawing.
  • Send an OEM quote. If you're buying a replacement part from an OEM and suspect you're paying a premium, send us the quote and whatever drawing or sample you have. We'll tell you honestly whether it's worth re-sourcing.

You'll hear back within one business day with a quote or a set of questions. If we're not the right fit for a given part, we'll say so plainly.

Engineer reviewing a CAD drawing of a flanged shaft assembly at a standing desk, representing Maple MPSS's design-for-manufacturing review before a short-run stainless production order
Work / Sourcing
The client's engineering team was spending more time sourcing one-off components than doing actual design work. We took over the full tail: quoting from their drawings, machining, inspection, and consolidated shipping. "We stopped chasing suppliers. The engineering team got their week back."
Client
An Ontario industrial services firm
Brief
Short-run stainless components for retrofit work
Materials
316 stainless, aluminum
Lot
Mixed: 1 to 50 per part, across ~30 part numbers
Next Step

Send a drawing. Or describe the part. Or send a recent OEM quote.

We respond within one business day with a quote or with the questions we need answered to produce one.

info@maplempss.com · +1 647-671-4516 · Burlington, ON · Chennai, IN